Morrison Bros Fig. 710F, 710FMO, 710FSM, 710FSS Solenoid Valves, SS (PTFE), Brass (FKM), Flanged, (710FMO Series - Manual Override)
Item Series:
Morrison Bros Fig. 710F, 710FMO, 710FSM, 710FSS Solenoid Valves, SS (PTFE), Brass (FKM), Flanged, (710FMO Series - Manual Override)
Downloadable Resources:
Product Ordering Information:
Additional Item Numbers (Not Shown On Above Chart)
Products Description & Features:
Description:
Normally closed solenoid valves are used to help prevent the accidental siphoning of a product from a tank in the event of a leak downstream below the liquid level. They are generally installed on the dispensing side of a fuel system pipeline. The valve opens upon the receipt of an electronic signal such as when a dispenser or pump is switched to the ‘on’ position.
Features and Details:
• Operates at 120 volts AC (24, 208, 220, 240, & 480 volts AC, and 12, 24, and 48 volts DC also available) • Minimum operating temperature is -40°F • Includes a continuous duty Class H standard coil. Other options are available • Must be mounted in a horizontal pipeline with solenoid vertical and upright • No differential pressure is required to open the valve • Connects to a ½” conduit. 18” lead wire provided • Enclosure is watertight and rated for hazardous locations on aboveground fuel storage tanks- NEMA 3, 4X, 7 and 9; groups C and D • Available in Viton or Teflon seals (3” only in Viton) • Has a built-in expansion relief • Flanged connections ANSI 150 RF • Maximum viscosity rating of 60 Centistokes • Manual override feature available in sizes ranging from ¾” to 2” for operation during a power outage (Fig. 710FMO or 710FSM).
Materials of Construction:
• Solenoid housed in an integral, watertight, explosion-proof shell. (710F) • Body... Cast bronze • Seals... FKM. (710FSS) • Body... 304 stainless steel • Seals... FKM or PTFE.
Certifications and Listings:
• UL Certified (Class I, Division 1, Groups C and D; Class II, Division 1, Groups E, F and G; Class III) • cULus Listed.
Note:
• It is strongly recommended that a line strainer with 100 mesh be installed at the inlet of this valve. Failure to do so may cause the valve to malfunction and void the warranty.
• Product can only be pumped in the direction of the flow arrow. Not designed for use as overfill prevention or process control valve.
Please inquire about product information, installation services, bulk pricing, variable lengths, quotes or any questions you may have!
sales@railyardsupply.com
(610) 652-5218
